What are the working principles of the blade type pneumatic motor? The working principle of pneumatic motor is not the same, here is a pneumatic mixer manufacturer to introduce.

1, can be stepless speed control: as long as the control of the opening of the intake valve or exhaust valve, that is, the control of the flow of compressed air, the output power and speed of the motor can be adjusted. It can achieve the purpose of adjusting speed and power.

2, it can be positive or negative. Most pneumatic motors can change the direction of motor inlet and exhaust simply by using the control valve, that is, the positive and negative rotation of the output shaft of the gas motor can be realized, and the instantaneous commutation can be made. The impact is very small in the positive and reverse conversion. One of the main advantages of the air motor reversing work is that it has the ability to increase almost instantaneously to full speed. Using the control valve to change the intake direction, the positive and reverse can be realized. The time is short, the speed is fast, the impact is small, and the load is not required.

3, work safety is not affected by vibration, high temperature, electromagnetic and radiation. It is suitable for harsh working environment. It can work normally under such unfavorable conditions as flammable, explosive, high temperature, vibration, humidity and dust.

4. Overload protection, no failure due to overload. When overloading, the motor only reduces or stops the speed. When the overload is lifted, the motor can be run again and again, and the failure of the machine parts is not produced. It can run continuously for a long time, and the temperature rise is smaller. With high starting torque, it can be started directly with load. Start, stop all rapid. It can be started with load. Start and stop quickly.

5. The range of power range and speed is wide. The power to hundreds of watts to several kilowatts; speed from zero to 10000 per minute turn. Easy operation, easy maintenance and maintenance. The air motor is simple in structure, small in size, light in weight, large in horsepower, easy to operate and convenient to repair. Using air as a medium, there is no difficulty in supply. The used air needs no treatment, and it can be put into the air without pollution. Compressed air can be centrally supplied and transported at a long distance.

Do you know the working principle of the blade type pneumatic motor through the pneumatic mixer manufacturer? If you want to learn more knowledge, please continue to pay attention to us.